The production of stainless steel pet cage to first blanking and welding of the main bar, and then the production of hoop wheel mold, the specific approach is in 5mm thick steel plate in accordance with the drawings of hoop diameter draw a circle. Dalian stainless steel pet cage production welding on the steel head, according to the drawings blind blanking, bending, welding hoop, and then according to the drawings spacing. After placing the hoop with a general 2 meters, weld the main bar above to ensure the straight and spacing of the main bar. You can use a stone pen to mark the hoop. After welding, the main reinforcement is to bind the spiral reinforcement. When binding, pay attention to the spacing and the arrangement in accordance with the plum shape. After welding the protective reinforcement layer, the inspection and acceptance are qualified.
Pay attention to the following points during production:
1, to ensure that the steel bar lap length meets the requirements of the main weld length binding lap length.
2, when welding the main bar, can not burn the main bar, welding slag to clean up.
3. Ensure that the main reinforcement is straight and the spacing between the main reinforcement and stirrup and spiral reinforcement meets the requirements.
Generally speaking, do a good job of spacing and welding no problem reinforcement cage quality can be guaranteed to be qualified!
Post time: 07-12-21