Decorative hook mesh selection of stainless steel, aluminum alloy, brass, copper and other alloy materials, the special process of the hook mesh. It is to do decorative silk mesh, today we introduce the decorative hook mesh aperture and wire diameter.
Appellation: hook flower guardrail is a variety of guardrail. The diameter of the opposite side of each grid is generally 6.5cm-14cm. The thickness of the wire used is generally from 3.5mm-6mm. Wire material is generally Q235 low carbon wire. The wire is welded through ginning into a decorative hook mesh. The general standard size of the mesh is 1.5 m X4 m, 2 m X4 m, 2 m X3 m. The general surface treatment is cold (electric) galvanized treatment. There are also hot-dip galvanizing, dipping, spraying. But overall, ninety-nine percent are cold (electric) galvanized.
The smaller the mesh of decorative hook net, the finer the demand, the larger the mesh, the thicker the demand. For example, for the mesh diameter of 6.5cm, the required iron diameter is 3.5mm-4mm. If it is thinner, it will be broken by welding, and if it is thicker, it is too heavy for workers to bear.
Decorative hook net size width generally does not span 2 meters. The length generally does not span 4m. It is difficult for workers to span 2 meters, and the second is that galvanized plating is not good. It can reach six meters in length, but it won’t cross six meters. Generally, the price will increase significantly after crossing 4 meters.
Decorative hook mesh solder joint welding is generally more robust, but if the worker is a novice, the skill of the dispatch machine is not high, it will present the condition of open solder joints. Once this situation appears, it will bring significant losses to customers and factories.
Post time: 12-08-21