Three aspects of electric welding mesh selection?

Electric welding net is generally used in building construction, breeding chicken pigeon rabbit cage, balcony protection, machine shield, flower guardrail and so on. According to the welding aperture, wire diameter is different, the use of electric welding net products are different, such as: the use of electric welding net on the insulation wall of the building, the welding net of the agricultural circle corn net, the use of breeding chicken, mink and other breeding electric welding net. So what should we pay attention to when purchasing electric welding mesh?

Mainly in the following three aspects
1. First, see whether the mesh surface is flat, whether the mesh is square, whether the hole distance is the same, and whether the weft wire is bent (note: the length of the mesh width is the weft wire). The weft wire of the normal electric welding mesh passes through the straight wire device, and is repeatedly welded with the wire at the exact time, so that the electric welding mesh hole distance is consistent, the mesh surface is flat, and the weft wire is straight.
2, see whether the solder joint is firm, whether the width of the net is flat on both sides, whether there is a broken wire phenomenon (note: the length of the net is the length of the wire), the solder joint of the normal welding mesh is after accurate voltage debugging, the welding mesh is stretched, strong, and the net width on both sides is according to the falling time of the broken wire knife to ensure that both sides of the flat, There will be no leakage on both sides of the protrusion of the iron wire is not cut off, the wire is broken, because the wire is used up, even if the fill or column hole is blocked, the wire can not enter normally caused, such as broken phenomenon can show a lack of a wire on the surface of the welding net.
3. Look at the packaging. The normal packaging appearance is to use a layer of brown paper paper with film to pack our welded electric welding mesh, so that it will not be oxidized and rusted during transportation.